free classifieds cars
Solar Generators & Regular Generators arrow Solar Generators arrow SolarGen Mobile 225/420W/1000AC



SolarGen Mobile 225/420W/1000AC


Price: $3,995.00
$3,255.30
You Save: $739.70


The Energy Store Mobile Solar Generator is a 2700 Watt hour battery system in a rugged ATA (Air Transport Asscociation) case; with a Morningstar PS-30M charge controller, thermal breaker/disconnect circuits, system monitoring and a 1000W pure sine wave inverter with remote control/meter. It comes with (two 210W solar Panels).

This unit should provide 1500 to 2200 watt hours of power on a daily basis (sun dependent). A perfect solution for emergency back-up electricity or remote locations.

The solar panels are hinged with stainless steel for easy folding for storage and they easily unfold for extremely simple deployment. The built in legs drop down for a perfect 25 -30 degree solar angle. (Can be made steeper or shallower upon request).

Specifications for the SolarGen Mobile 225AH/420W/1000WAC solar power pack generator.

SolarGen Package & Dimesions:

Aluminum Clad ATA appoved Transport Case : 25 1/2" long x 16 1/2" wide x 25 1/2" high - Weight Approx 275 lbs. (Plus Solar Panels)

Solar Panel Specifications:

Model225AH/420W/1000WAC
Power (W)420 Watts (210 x 2)
Open Circuit Voltage (V)22.80 Voc
Short Circuit Current (A)12.11 Isc
Maximum Power Voltage (V)18.30 Vmp
Maximum Power Current (A)11.48 Imp
Dimensions (in)(LxWxD)37 1/2" x 65" x 1 3/8" (x2)
Weight (lb)85lb

ProStar PWM Solar Controller with Digital Meter:

Rated Solar Current - 30 Amps

Rated Load Current - 30 Amps (not used)

System Voltage - 12/24 Volts

Warranty 5 Years

    • Estimated 15 year life
    • PWM series battery charging (not shunt)
    • 3-position battery select: gel, sealed or flooded
    • Very accurate control and measurement
    • Jumper to eliminate telecom noise
    • Parallel for up to 300 amps
    • Temperature compensated charging
    • Tropicalization
    • No switching or measurement in the grounded leg
    • 100% solid state
    • Very low voltage drops
    • Current compensated low voltage disconnect (LVD)
    • LEDs to indicate battery status and faults
    • Capable of 25% overloads
    • Remote battery voltage sense terminals
    Pure Sine Wave Inverter:

 Power Continuous - 1000 Watts

Power Surge - 2000 Watts

Output Voltage - 115VAC +/- 3%

Output Frequency - 60 Hz

Output Voltage Waveform - Pure Sine wave

Input Voltage - 10.5 - 15.3 VDC

Input Current at No Load - <0.6A

Low Input Voltage Warning Alarm - 11.0VDC

Low Input Voltage Shut-down - 10.5VDC

High Input Voltage Shut-down - 15.3VDC

Operating Ambient Temperature - 0 to 40 degrees C (32 - 104F)

Peak Efficiency - 85%

Cooling - Temperature controlled Fan

DC Input Connections - 3/8" Nut and Bolt with Plastic Protectors

AC output - Dual NEMA5-220 NorthAmerican Receptacles with GFCI

DC Side Input Fuse - 40A

Dimensions - 12.2" Long x 8.74" Wide x 3.46" High

Weight - 7.1 lbs

Battery Specifications

The Solar Valve-Regulated Gel Monobloc series offers reliable, versatile, maintenance-free power. The thixotropic gel enables these batteries to be completely spillproof providing many available options for installation. The gelled electrolyte gives more protection to the battery plates, and is better suited for deep cycle discharge. With longer discharge and less charging time, these batteries are ideal for many renewable energy applications.

The Valve-Regulated Sealed construction eliminates periodic watering, corrosive acid fumes, and spills TM Technology Optimizes power capacity, cell consistency, and long-term reliability and Negative Plate are Lead calcium.

Self-Discharge Less than 2% per mont

Gelled Electrolyte Electrolyte will not stratify.

Positive h stand loss means little deterioration during transport and storage.

Exclusive IPF Rated Non-Spillable by ICAO, IATA, and DOT;  no special containers needed. Transports easily and safely by air.

The Solar series of valve-regulated, gelled-electrolyte batteries is designed to offer reliable, maintenance-free power for renewable energy applications where frequent deep cycles are required and minimum maintenance is desirable.

Specifications:

Voltage 12 volts nominal

Plate alloy Lead calcium

Element, post Threaded stud or flag terminal, forged bushing

Container/cover Polypropylene

Electrolyte Sulfuric acid thixotropic gel

Vent Self sealing

Dimensions............20.75" Long x 11" Wide x 10" High

Weight....................157 lbs.

Capacity.................225 Amp Hours @ 20 hr rate

The Energy Store Solar Power Pack Generators are assembled with the highest quality components and are designed to last for years even with everyday usage.  Most of our systems use MPPT (Maximum Power Point Tracking) charge controllers for optimized maximum energy harvest and Pure Sine Wave Inverters that will operate even the most sensitive electronic equipment. Pure Sine Wave Inverters allow motors to run better and cooler; reduce audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV\'s; fax and answering machines; and operate sensitive microprocessor equipment without the problems experienced by modified sine wave inverters.

We use sophisticated relay circuitry to provide low voltage disconnect of the inverter when the battery voltage drops below 11.50 Volts (optional 11.00 Volts) in order to protect the battery from over discharging and to preserve the life of the battery.

All circuits are over-current protected and there are fuses and/or breaker /disconnects to protect your equipment from damage.

We are able to mix and match solar panels and batteries to provide you with the combination of solar energy and battery power that will best suit your application(s).


Availability

Usually ships in: To Order







Last Updated: