Blue Sky Solar Boost 3024DI MPPT Charge Controller 12/24V/30 Amp
|
Blue Sky Solar Boost 3024DI MPPT Charge Controller 12/24V/30 Amp |
|
|
|
||
| Price:
$409.00
|
||
Patented Maximum Power Point Tracking technology allows Solar Boost 3024i provides an advanced fully automatic 3-stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, where as the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. Blue Sky Energy’s advanced Integrated PowerNet™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication SPECIFICATIONS Solar Boost 3024i Output Current Rating Nominal Battery Voltage 12 / 24VDC PV Input Voltage 57VDC maximum Power Consumption 0.35W Typical standby Charge Algorithm 3-stage Bulk/Acceptance/Float (Full charge can be based on net charge current matched to battery amp-hours ) Acceptance Voltage 14.4VDC (range 14.0 – 14.8VDC , 10.0 – 40.0VDC ) Float Voltage 13.2VDC (range 13.2 – 13.8VDC , 10.0 – 40.0VDC ) Equalization Voltage 15.2VDC (range 10.0 – 40.0VDC ) Single output field configurable as either: 20 Amp load controller –or– 2 Amp auxiliary battery charger 2 Amp typical, same charge voltage as primary battery Auxiliary Output Function �� 1.0W Typical charge on�� automatic or manual operation�� Aux. Battery charge�� Temperature Compensation Optional temperature sensor adjusts charge voltage setpoints based on measured battery temperature, -5.00 mV/ Power Conversion Efficiency 97% Typical @ 28 Volt 24 Amp Output Cabinet Dimension 6 7/8”H x 6 5/8” W x 3 3/8”D (17.4cm x 16.8cm x 8.59cm) Analog Input Accuracy / Range Battery & Aux. Battery voltmeters, 40.0VDC Input/Output ammeters 35.0A Communication Blue Sky Energy’s proprietary IPN Network interface. Allows up to 8 IPN capable controllers to set up and operate as a single machine, share a common battery temperature sensor, and share an IPN-Remote or IPN-ProRemote display. Simple twisted pair cable interface with no special communication hardware required. Environmental -40 – +40 Load Control 20 Amp maximum; ON @ ��12.6VDC / OFF @ ��11.5VDC (Range 10.0 – 40.0VDC , or net battery amp-hours )��C/cell correction factor (Range -0.00 – -8.00 mV/��C/cell ) �� sensor range -60 – +80��C��0.50% FS �� PV voltmeter, 60.0VDC ��0.50% FS��0.50% FS��C, 10 – 90% RH non-condensing |
||
Solar Boost 3024i to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste your money by throwing PV power away! Get the power you paid for with a SolarBoost 3024i charge controller. Last Updated: