Solar Generators SolarGen Mobile 225/420W/1000AC
|
SolarGen Mobile 225/420W/1000AC |
||||||||||||||||
|
|
|||||||||||||||||
| Price:
$3,255.30 You Save: $739.70 |
|||||||||||||||||
The Energy Store Mobile Solar Generator is a 2700 Watt hour battery system in a rugged ATA (Air Transport Asscociation) case; with a Morningstar PS-30M charge controller, thermal breaker/disconnect circuits, system monitoring and a 1000W pure sine wave inverter with remote control/meter. It comes with (two 210W solar Panels). This unit should provide 1500 to 2200 watt hours of power on a daily basis (sun dependent). A perfect solution for emergency back-up electricity or remote locations. The solar panels are hinged with stainless steel for easy folding for storage and they easily unfold for extremely simple deployment. The built in legs drop down for a perfect 25 -30 degree solar angle. (Can be made steeper or shallower upon request).
Specifications for the SolarGen Mobile 225AH/420W/1000WAC solar power pack generator. SolarGen Package & Dimesions: Aluminum Clad ATA appoved Transport Case : 25 1/2" long x 16 1/2" wide x 25 1/2" high - Weight Approx 275 lbs. (Plus Solar Panels) Solar Panel Specifications:
ProStar PWM Solar Controller with Digital Meter: Rated Solar Current - 30 Amps Rated Load Current - 30 Amps (not used) System Voltage - 12/24 Volts Warranty 5 Years
Power Continuous - 1000 Watts Power Surge - 2000 Watts Output Voltage - 115VAC +/- 3% Output Frequency - 60 Hz Output Voltage Waveform - Pure Sine wave Input Voltage - 10.5 - 15.3 VDC Input Current at No Load - <0.6A Low Input Voltage Warning Alarm - 11.0VDC Low Input Voltage Shut-down - 10.5VDC High Input Voltage Shut-down - 15.3VDC Operating Ambient Temperature - 0 to 40 degrees C (32 - 104F) Peak Efficiency - 85% Cooling - Temperature controlled Fan DC Input Connections - 3/8" Nut and Bolt with Plastic Protectors AC output - Dual NEMA5-220 NorthAmerican Receptacles with GFCI DC Side Input Fuse - 40A Dimensions - 12.2" Long x 8.74" Wide x 3.46" High Weight - 7.1 lbs Battery Specifications The Solar Valve-Regulated Gel Monobloc series offers reliable, versatile, maintenance-free power. The thixotropic gel enables these batteries to be completely spillproof providing many available options for installation. The gelled electrolyte gives more protection to the battery plates, and is better suited for deep cycle discharge. With longer discharge and less charging time, these batteries are ideal for many renewable energy applications. The Valve-Regulated Sealed construction eliminates periodic watering, corrosive acid fumes, and spills TM Technology Optimizes power capacity, cell consistency, and long-term reliability and Negative Plate are Lead calcium. Self-Discharge Less than 2% per mont Gelled Electrolyte Electrolyte will not stratify. Positive h stand loss means little deterioration during transport and storage. Exclusive IPF Rated Non-Spillable by ICAO, IATA, and DOT; no special containers needed. Transports easily and safely by air. The Solar series of valve-regulated, gelled-electrolyte batteries is designed to offer reliable, maintenance-free power for renewable energy applications where frequent deep cycles are required and minimum maintenance is desirable. Specifications: Voltage 12 volts nominal Plate alloy Lead calcium Element, post Threaded stud or flag terminal, forged bushing Container/cover Polypropylene Electrolyte Sulfuric acid thixotropic gel Vent Self sealing Dimensions............20.75" Long x 11" Wide x 10" High Weight....................157 lbs. Capacity.................225 Amp Hours @ 20 hr rate The Energy Store Solar Power Pack Generators are assembled with the highest quality components and are designed to last for years even with everyday usage. Most of our systems use MPPT (Maximum Power Point Tracking) charge controllers for optimized maximum energy harvest and Pure Sine Wave Inverters that will operate even the most sensitive electronic equipment. Pure Sine Wave Inverters allow motors to run better and cooler; reduce audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV\'s; fax and answering machines; and operate sensitive microprocessor equipment without the problems experienced by modified sine wave inverters. We use sophisticated relay circuitry to provide low voltage disconnect of the inverter when the battery voltage drops below 11.50 Volts (optional 11.00 Volts) in order to protect the battery from over discharging and to preserve the life of the battery. All circuits are over-current protected and there are fuses and/or breaker /disconnects to protect your equipment from damage. We are able to mix and match solar panels and batteries to provide you with the combination of solar energy and battery power that will best suit your application(s). |
|||||||||||||||||
Availability Usually ships in: To Order |
|||||||||||||||||
Last Updated: